PCV joint profile - LDB

Joint profile used to perform the decorative grooves on the facades of buildings and in their interior. It increases the aesthetic value of buildings, divides facade which improves the visual effect. Increasingly used in contemporary architectural form. Lath guarantees the performance of straight and equal grooves in the facade, cheaper and takes less time compared to the traditional manual method of using corners with mesh. The useage of PVC joint profiles strengthens the edge of the groove and ensures a tight seal of laths through the use of a suitable connector, so that a groove is resistant to mechanical damage and water. Lath is also made with a fiberglass mesh , making it easy to mount.  Laths can be applied both to the facade on polystyrene and mineral wool. Profiles in version with mesh or without mesh are in four commonly used widths:  10mm, 20mm, 30mm, 50mm. Used fiberglass mesh from the  "VERTEX" company is permanently mounted by ultrasonic welding longitudinally on both sides of profile. Mesh width is 2 x 100mm. On special order can be made in any color and any oval for the special facades.

PVC corner with mesh 8-12

PVC corner with fiberglass mesh 145g, made of high quality materials used in thermal insulations of buildings to reinforce the corners of buildings, allows to a smooth and straight finish of the polystyrene edge. Corner doesn’t deform during transport and during storage, as it often happens with the corners which are made of aluminum.

PCV adjustable corner profile – LKU

The profile is made of PVC, used for finishing plasterboard which is mounted at different angles in the range of 0 - 180 degrees. It facilitates finishing works and execution straight edges, prevents from cracking. This profile is useful especially in building attics, where we have to face angles other than 90 degree. Thanks to the fact that the profile is made of PVC it is resistant to mechanical deformation.

PCV adjustable corner profile with mesh – LKUS

The profile is made of PVC, used for finishing plasterboard which is mounted at different angles in the range of 0 - 180 degrees. It facilitates finishing works and execution straight edges, prevents from cracking. This profile is useful especially in building attics, where we have to face angles other than 90 degree. Thanks to the fact that the profile is made of PVC it is resistant to mechanical deformation. Profile has a mesh with a basis weight 145 g.

Window corner profile – with a seal

Window corner profile ensures isolation and prevents from cracking in merging places of window and the wall. It makes it easy to finish and protect windows and doors during plastering.

Window corner profile – with a seal and mesh

Window corner profile ensures isolation and prevents from cracking in merging places of window and the wall. It makes it easy to finish and protect windows and doors during plastering.

Color window corner profile – with a seal and mesh

Window corner profile ensures isolation and prevents from cracking in merging places of window and the wall. It makes it easy to finish and protect windows and doors during plastering.

Occurs in colors: brown, golden oak, dark gray

Termination lath for plaster – LZS

Termination plaster lath made of PVC and fiberglass mesh. The lath is used to create endings or discoloration at the plaster on the facade insulation systems and traditional plasters - profile forms the border of color. Very easy to install, it allows you to quickly and aesthetically complete facade.

PVC corner for gypsum plaster – NTM PCV

The corner is made of PCV. Plastic profile is used to finish and protect the corners of the walls in the implementation of wet plaster. Due to the lack of possibility of corrosion, it can be used in places with high humidity (plaster exterior, swimming pools, bathrooms, kitchens, garages, basements, etc.).

Advantages:

- Used for gypsum plasters
- Rigid and easy to install
- Does not stain filler mass during processing
- Resistant to mechanical damage to the building chemistry and atmospheric conditions

Spacer lath for clinker

Spacer clinker lath made of PVC, used in clinker bricks, facilitate the implementation. Using a spacer lath helps in getting a uniform size of fugues.

Diklatation profiles – PDU & PDV

Dilatation profile straight or angled used for thermal insulation of walls, insulated of polystyrene or mineral wool in order to protect surface from cracking. The flexible material between two corners of PVC, absorbs the tension from the facade and ensures tightness of the joint. Filling the gap protects it from moisture getting into the facade.

Drip profile

Drip profile made of PVC and fiberglass mesh used to finish the edges of balconies, terraces and horizontal edges of the facade. Useage of this profile prevents from stain and soaking of the plaster. Often used as a starter lath in thermal insulation systems. There are three types of profiles: visible, concealed instalation (invisible) and type T.

PCV plasterboard corner profile for arches

Profile is used to finish the irregular edges of plasterboard. It protects the edges and facilitates the realization of the planned curves, arcs. Special perforation has an influence on its high plasticity what makes it easy to bend corners. Profile also occurs with mesh.